| Admin Password: |
(purposely not displayed for security protection) |
| Layer 2 QoS: |
|
| STUN server is : |
(URI or IP:port) |
| Keep-alive Interval: |
(in seconds, default 20 seconds) |
| Use STUN to detect network connectivity: |
No
Yes, total STUN response misses
to restart DHCP (mininum=3)
|
| Use DNS to detect network connectivity: |
No
Yes
|
| Firmware Upgrade and Provisioning: |
Upgrade Via
TFTP HTTP HTTPS
Firmware Server Path:
Config Server Path:
XML Config File Password:
HTTP/HTTPS User Name:
HTTP/HTTPS Password:
Always send HTTP Basic Authentication Information
Send HTTP Basic Authentication Information only when challenged
Firmware File Prefix:
Firmware File Postfix:
Config File Prefix:
Config File Postfix:
Allow DHCP Option 66 or 160 to override server:
No
Yes
3CX Auto Provision:
No
Yes
Automatic Upgrade:
No
Yes, every
minutes(30-5256000).
Yes, daily at hour
(0-23).
Yes, weekly on day
(0-6).
Always Check for New Firmware at Boot up
Check New Firmware only when F/W pre/suffix changes
Always Skip the Firmware Check
|
| Disable SIP NOTIFY Authentication: |
No
Yes (Device will not challenge NOTIFY with 401 when set to Yes)
|
| Authenticate Conf File: |
No
Yes (cfg file would be authenticated before acceptance if set to Yes) |
| SIP TLS Certificate: |
|
| SIP TLS Private Key: |
|
| SIP TLS Private Key Password: |
|
| ACS URL: |
|
| ACS Username: |
|
| ACS Password: |
|
| Periodic Inform Enable: |
No
Yes |
| Periodic Inform Interval: |
|
| Connection Request Username: |
|
| Connection Request Password: |
|
| CPE SSL Certificate: |
|
| CPE SSL Private Key: |
|
| Country Specific Deployment: |
|
| System Ring Cadence: |
|
| Call Progress Tones: |
Syntax: f1=val[,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]]];
(Frequencies are in Hz and cadence on and off are in ms)
|
| Prompt Tone Access Code: |
(Key pattern to get Prompt Tone. Maximum 20 digits. No default.)
|
| Lock Keypad Update: |
No
Yes (configuration update via keypad is disabled if set to Yes) |
| Disable Voice Prompt: |
No
Yes (voice prompt is disabled if set to Yes) |
| Disable Direct IP Call: |
No
Yes (direct IP call is disabled if set to Yes) |
| Disable Attended Transfer: |
No
Yes (attended transfers are disabled if set to Yes) |
| NTP Server: |
(URI or IP address) |
| Allow DHCP option 42 to override NTP server: |
No
Yes
|
| Syslog Server: |
|
| Syslog Level: |
|
| Send SIP Log: |
No
Yes
|
| Download Device Configuration: |
|
| Download Device XML Configuration: |
|
| Upload firmware: |
|
|
|